Coffee Tables
No products in this category yet.
Coffee table, side table or C-shape
Most of this decision comes down to where the piece stands in relation to the seating. A coffee table faces a sofa and serves several people from a wide top: Montreal, T01, T02, T03, T05, Deluxe, Dublex, Ira and Origo fall into that definition. A side table stands beside a single chair and needs far less surface — Pörtföy at 48x40x50 cm, Prime at 45x35x50 cm, Stone at 70x55x45 cm and Trey at 40x40x46 cm belong here. The third type is the C-shape: Motto is a C-shaped side table that slides easily under armchairs and sofas, and its single-leg structure lets the top reach the seating area without occupying the space in front. In waiting areas where people work on laptops, that is the form that earns its place.
Read more Show less
Top sizes and the height spread
Across 18 measured pieces, Premium-line models included, widths run from 40 to 160 cm, depths from 35 to 80 cm and heights from 38 to 97 cm. At the low end sit Trey Sehpa at 40x40x38 cm and the 38 cm heights of T03 and T05 — tops designed to sit below the seat line in front of a sofa. At the high end, Opus at 120x79x97 cm is the tallest piece in the category and is defined for office waiting areas, lounges and executive spaces. The practical reference for height is the seat: poufs and waiting seats in this catalogue are recorded at 43 to 45 cm seat height, so tops between 38 and 50 cm land level with the seat or slightly below it. Pipe is the exception — at 75 cm it is table height rather than coffee table height, listed as 60×60, 80×80 and 100×100 cm squares and Ø60 to Ø120 rounds, so it belongs in a cafe layout.
Base structures and what they allow
Base type looks like a styling choice but actually decides who gets to use the volume underneath. Deluxe builds a light, plain silhouette on slender metal legs. Prime is distinguished by a vertical metal rod leg structure and runs to six sizes, from compact side tables to generous central pieces. Pörtföy achieves stability on three legs rather than four, which leaves more clearance for feet. T01 uses painted metal legs on a circular base, T02 a pyramid base and T03 a biconical base — all three centre the load, which removes leg collisions in round arrangements where people sit all the way around. Melbourne takes a different direction with wooden frames and tapered legs.
Melamine, wood and amorphous tops
Melamine is the dominant top material in this range, offered with metal legs in various colour combinations; Dublex, Motto, Prime, Stone, T01, T02 and T03 all carry that specification. In contract projects melamine is chosen for wipe-clean maintenance and consistent colour across a repeat order. On the wood side, the Trey coffee table designed by Ece & Oğuz Yalım brings wood and metal together. Three top geometries are available: square and rectangular tops such as T05, Deluxe and T02; round tops such as T01, T03 and Ira; and organic outlines, where Stone’s amorphous melamine top is listed at 70x55x45 and 95x70x35 cm and can be used side by side or apart.
Series that group together
In waiting areas a coffee table is a small organising device as much as a surface. Dublex is a two-tiered series whose lower shelf adds storage or display space, listed at 63x38x51, 103x38x41 and 123x48x30 cm. Groupable series are a separate consideration: Ira is designed to be used individually or together across different heights and diameters, at 60x60x50, 120x120x40 and 160x160x30 cm, which builds three distinct levels. Origo brings poufs and coffee tables into one series for lounge areas, with sizes running from 160x80x45 cm up to 290x201x45 cm for large foyers and lobbies. Deluxe’s square, rectangular and round top options let you mix forms in one room while keeping a single design language.
Matching the series to the space
In residential and hotel social areas, pieces with strong volumes such as Montreal and T05 define the room. In office waiting and lounge areas, melamine-topped, metal-legged series such as Deluxe, Prime, Dublex and Pörtföy are easier to maintain over years of use. In foyers and large lobbies, groupable series such as Origo and Ira carry the scale. Buyer type matters too: an individual purchase usually means one piece chosen on form, while contract buying means several sizes from one series with the expectation that the series will still exist when a single unit needs replacing. Melbourne, Montreal, T01, T02, T03, T04 and T05, all named above, are listed on the Premium line and do not appear as cards in this grid, which shows twelve pieces.
Plan coffee tables with the seating around them. Chairs covers the full seating range, while sofas and waiting chairs show the pieces that will surround the table. For extra seating and attached tops, see poufs and the wider Accessories category; for dining and working heights go to tables and cafe and bar tables, and for hospitality projects see Horeca.
Frequently Asked Questions
How do I choose the right size and shape coffee table for my living room?
Selecting the perfect coffee table involves considering your sofa's dimensions and room layout. A good rule of thumb is for the table to be about two-thirds the length of your sofa and roughly the same height as its seat. Kavela Furniture offers various shapes like rectangular, round, and oval to complement any space, from compact apartments to spacious lounges. Visit our showroom in Çankaya, Ankara, at Üsküp Caddesi No.41/A to see our T05 or Montreal Coffee Table options.
What are the most durable and stylish materials for coffee tables?
Durability and style often go hand-in-hand with materials like solid wood, metal, glass, and marble. Each offers unique aesthetics and resilience. Kavela Furniture prides itself on crafting coffee tables from high-quality materials, ensuring longevity and timeless appeal. Our T02 Coffee Table, for instance, blends robust construction with elegant design. Explore our collection at Üsküp Caddesi No.41/A, Çankaya, Ankara, open Mon-Sat 10:00-19:00, for inspiration.
Can I get a custom-sized coffee table if standard options don't fit my space?
Absolutely! At Kavela Furniture, we understand that every living space is unique. We offer made-to-measure production services for our coffee tables, ensuring a perfect fit for your specific requirements. Whether you need a unique dimension for our T03 Coffee Table or a special finish, our team can help. Contact us or visit our showroom in Çankaya, Ankara, at Üsküp Caddesi No.41/A to discuss your project-based delivery and custom design needs.
What kind of warranty and delivery options does Kavela Furniture offer for coffee tables?
Kavela Furniture stands behind the quality of our coffee tables, offering a comprehensive 2-year warranty on all our products, including popular models like the T05 and Montreal Coffee Table. For your convenience, we provide project-based delivery services to ensure your new furniture arrives safely. You can learn more about our delivery and warranty policies by visiting our showroom at Üsküp Caddesi No.41/A, Çankaya, Ankara, open Mon-Sat 10:00-19:00.
How can I best style my coffee table to enhance my living room decor?
Styling your coffee table is about balance and personality. Start with a tray to group smaller items like remotes or coasters. Add varying heights with books, a small plant, or decorative objects. Kavela Furniture's diverse range, including the minimalist T02 or the elegant T03 Coffee Table, provides the perfect foundation. Visit us in Çankaya, Ankara, at Üsküp Caddesi No.41/A, Mon-Sat 10:00-19:00, for design ideas and to see our pieces firsthand.
Latest posts
@kavelafurniture
